上海易瑾慧成为意大利COMER s.r.l.公司在中国的总代理
时间:2018-06-22 点击数:
2014年7月，上海易瑾慧机电科技有限公司荣幸获得意大利COMER s.r.l.公司独家代理权，成为意意大利COMER s.r.l.公司在中国的总代理，
关于意大利COMER s.r.l.公司的介绍如下：
synchronous motors with squirrel-cage rotors with cast aluminium or, in the larger sizes, copper bars. Both air and liquid cooling is available.
Synchronous motors with permanent rare earth magnets, characterized by extremely high torque and power values and very reduced sizes. These are also available with a variety of cooling solutions.
DC motors from sizes 80 to 200. Although our production is mainly dedicated to AC power, we are still involved in the production of this type.
-
ALL
-
ASYNCHRONOUS
-
SYNCHRONOUS
-
DC
we inherited resourcefulness and vision.
1958
The story begins
The Comer business project starts: Vittorio Pacinotti, Camillo Lagomarsini and Ferdinando Volpato together begin an adventure that will stay with them for life. The new company is involved in designing and manufacturing transformers and small AC motors
1969
Premises and productivity double
Comer moves into a new building owned by the company, doubles the surface area of the plant and increases production capacity.
1972
First DC motor line
Comer Impianti
The launch of the first line of DC motors entirely designed by Comer alone. This line is soon received by the market and Comer breaks into the complex industry of quality DC motors. Alberto Baroni and Mario Scarazzato kick off the Comer Impianti sales agency and contribute to the success of Comer around the country.
1983
DC motor development
The innovative line of DC motors develops with a rectangular laminated casing for 2-pole motors and a squared casing for 4-pole motors: the smallest is the 2-pole RTL 80 series, the largest is the 4-pole TL 200. They improve the performance of motors in DC and their power/weight ratio.
1990
Special asynchronous vector motors
The first line of asynchronous special "vector" motors appears; it uses the same sophisticated technology as the DC motor materials, applied to an AC motor design.
1995
Quality certification
New extension
Comer puts a quality control system in place and is among the first Italian companies to obtain the ISO9000 certification from the QCS institute. New offices and a new warehouse: with its 4000 sq m. of indoor space, Comer grows in size and capacity to satisfy even the most demanding customers.
2000
Motors Powertech Program
Powertech Program, the new line of special asynchronous motors with fully laminated casing is launched: high performance, compact size, attractive design; the Fluid AX series is developed with a liquid cooling circuit. The uniqueness of these engines draws the attention of important industrial groups who choose COMER as their partner.
2006
Comer Solutions
Comer Impianti becomes Comer Solutions, the new sales agency owned by Comer.
2009
Energy recovery testing room
The innovative testing room with 2.5MW obtained completely through energy recovery is inaugurated: respect for the environment and cutting edge technology to offer maximum technical support to customers.
2010
Torque permanent magnet motors
The first set of Torque permanent magnet motors is unveiled. These boast high polarity and an extremely high torque/size ratio. From the same basic design comes the series of generators in the 30kW-200kW range, to be installed on small wind turbines.
2011
Photovoltaic systems and the safeguarding of the environment
The 140kW photovoltaic system is created to satisfy 75% of the domestic energy needs of the company and to avoid the emission of about 90 tonnes of CO2 each year. Comer's ecological awareness for the protection of the environment is renewed.
2014
Wind generators
Vacuum impregnation systems and drying ovens
The first 100kW wind turbine is created with high performance 50rpm "direct drive" and a 710mm shaft height. A new expansion: the modern vacuum impregnation machinery and the new curing furnace system are manufactured; in addition the use of the latest formulated resins with a low environmental impact means that Comer ensures a further increase in product quality.
2015
The largest motor
This is the year that the largest motor is designed and built by Comer: 710mm axis height, 80,000Nm maximum torque, 1.7MW maximum power at 200rpm, the first of a series which goes up to 150,000Nm.
2016
Into the future
The journey towards the future continues. New functional and innovative applications are designed, futuristic materials are tested out. The corporate communications plan is developed: there's a new logo while web site content and style is updated to describe the company values and commitment of its people.
What's our dream? It's to leave the indelible mark of our passion on our daily work.
