产品中心/Product Center
品牌
*注：按产品型号，可检索常见问答、样本、证书等信息。
CURRENT TRANSFORMERS FOR DIRECT INPUTS - Current Sensor TT40 订购编号:
点击这里发送询价请详细填写一下内容，包括产品原产国、品牌完整名称以及您所能得到的所有信息，这将有助于我们准确迅速的报价。非常感谢！
| CURRENT TRANSFORMERS FOR DIRECT INPUTS - Current Sensor TT40 series |
 |
|
Wires leadings primary currents MUST be of insulated type, with adequate insulation according to the line voltage and with adequate current-carrying capacity. The wires leading current through the current sensor must be protected from exceeding the maximum allowable by the sensor. These sensors must be used with EL.CO instruments and only with EL.CO instruments fitted for use with TT series sensors. The instrument’s SETUP menu allows to set the transformation rate adequate to the sensor (see Table TT-sensor ratios) and it’s possible to visualise readings of current up 999 A. Should the case be that calculated current is higher than the maximum value, the display will show the over range condition. The maximum setting of the transformation ratio is 2000/5=400. |
| Technical data (PDF Format) |
| Models |
| TT40 |
