Antennas Amplifiers

Type: OM-3R/4

Amplifier OM-3R/4 is suitable to amplify signals from antennas through the coaxial cable.

It enables to distribute the signal input from antenna to four outputs (four TV sets). It has five »F« female connectors.

The amplifier must be connected directly to power supply source DC 230V, 50Hz.

It is used only indoor, screws for fix it into wood are inclosed.

• Frekvency range: 40-862 MHz

• Gain: 24 dB

• Gain control: 0-10 dB
   
• Noise figure: 6 dB

• Max. output level: 85 dBV

Type: OM-3R/8

Amplifier OM-3R/8 is suitable to amplify signals from antennas through the coaxial cable.

It enables to distribute the signal input from antenna to eight outputs (eight TV sets).

It has nine »F« female connectors. The amplifier must be connected directly to power supply source DC 230V, 50Hz.

It is used only indoor, screws for fix it into wood are inclosed.

• Frekvency range: 40-862 MHz

• Gain: 20 dB

• Gain control: 0-10 dB
   
• Noise figure: 6 dB

• Max. output level: 90 dBV

Type: OM-2R/1

Antenna amplifier OM-2R/1 is suitable to amplify antennas, couplers or CATV signals through the coaxial cable.

It has two »F« female connectors. The amplifier must be connected directly to power supply source DC 230V, 50Hz.

It is used only indoor, screws for fix it into wood are inclosed.

• Frekvency range: 40-862 MHz

• Gain: 25 dB

• Gain control: 0-10 dB
   
• Noise figure: 6 dB

• Max. output level: 87 dBV

Type: OM-2R/2

Antenna amplifier OM-2R/2 is suitable to amplify antennas, couplers or CATV signals through the coaxial cable.

It enable to distribute the signal input from antenna to two outputs (two TV or radio sets ).

It has three »F« female connectors. The amplifier must be connected directly to power supply source DC 230V, 50Hz.

It is used only indoor, screws for fix it into wood are inclosed.

• Frekvency range: 40-862 MHz

• Gain: 26 dB

• Gain control: 0-10 dB
   
• Noise figure: 5 dB

• Max. output level: 85 dBV

Type: OM-3RS

CATV antenna amplifier OM-3RS is suitable to amplify antennas, couplers or CATV input through the coaxial cable.

It has two regulations: amplification and slope. It has built-in return path for using internet via CATV network.

It is used only indoor, screws for fix it into wood are inclosed.

• Frekvency range: 47-862 MHz

• Gain: 23 dB

• Gain control: 3-23 dB
   
• Slope control: -1-18 dB
   
• Noise figure: maks. 7 dB

• Return path: 5-30 MHz, -2 dB
   
• Max. output level: 105 dBV

工程咨询

数据中心

采油平台

发电厂

核电厂

输配电

政府及军事设施

冶金矿业

制造业

可再生能源

铁路运输系统

教育系统