品牌
*注：按产品型号，可检索常见问答、样本、证书等信息。
DZ8 Analog Teleprotection Terminal 订购编号:
点击这里发送询价请详细填写一下内容，包括产品原产国、品牌完整名称以及您所能得到的所有信息，这将有助于我们准确迅速的报价。非常感谢！
DZ8 Analog Teleprotection Terminal
Teleprotection equipment is one of the most important components in power systems protection, enabling fast and selective isolation of defective HV lines. The DZ8 teleprotection equipment is a basic building block of command type teleprotection system.
Main features
- Duplex transmission of up to four protective commands over analog transmission channels
- Programmable command transmission characteristics permit adaptation to any protection scheme
- Optimum Digital Signal Processing algorithms for secure and reliable operation via PLC channels with the highest possible transmission rate
- Signal boosting for full exploitation of the available transmission power for each protective command
- Redundant command input and output, preventing false operation due to single component failure
- Equipment setting and monitoring through built in MMI console or personal computer
- Loop Test - automatic or manual
- Internal real time clock (RTC) with provision for external clock synchronization
Technical data
| Modulation method | F6 (ON/OFF, frequency happing) |
| Operation mod | duplex four-wire transmission |
| Number of commands | up to 4 |
| Type of command | Transmission time (ms) | Dependability Pmc | Security Puc |
| Blocking | <17 | <10E-3 | <10E-3 |
| Permissive tripping | <17 | <10E-3 | <10E-4 |
| Direct tripping | <2 | <10 | <10 |
Applications
Teleprotection equipment is intended for transmission of up to four protective commands and can be used for permissive tripping, blocking and direct tripping.
工程咨询
数据中心
采油平台
发电厂
核电厂
输配电
政府及军事设施
冶金矿业
制造业
可再生能源
铁路运输系统
