收藏 设为首页 搜索

ModBUS I/O Digital I/O modules    订购编号:

点击这里发送询价

请详细填写一下内容,包括产品原产国、品牌完整名称以及您所能得到的所有信息,这将有助于我们准确迅速的报价。非常感谢!

品牌厂商(Manutacturer)*

公司名称*

产品名称(Product Name)*

联系人*

产品型号(Product Type)*

联系地址*

产品序列号(ID-Nr;Artikel-Nr)

联系电话*

产品描述(Voltage,Amp,Kw,Rpm)

传真*

需求数量(Quantity demanded)

联系邮箱*

附加信息,更具体要求

Digital I/O modules: 
EZ-10-D-IN:   10-CH digital input module ModBUS
EZ-10-D-OUT:   10-CH digital output module ModBUS
EZ-D-IN:   5-CH digital input module ModBUS
EZ-D-IO:   5-CH digital output module ModBUS
EZ-D-OUT:   8-CH, 6 digital input / 2 digital output control module ModBUS
EZC-16DI-8DO:   16-CH digital input - 8-CH digital output module ModBUS / CANopen
EZC-24DI:   24-CH digital input module ModBUS / CANopen
EZC-24DO:   24-CH digital output module ModBUS / CANopen

EZ-10-D-IN

10-CH Digital Input module / RS485


EZ-10-D-IN is a 10 digital inputs with self-powered 16V DC shared negative pole. EZ-10-D-IN has 8 built-in inputs with 16 bit contactor with 100 Hz max. frequency and 2 inputs with 32 bit contactor with 10 kHz max. frequency. At 10 kHz Z-10-D-IN assures frequency measurement. For 100 Hz input the module measures period, frequency and TON, TOFF. The module offers possibility to set total counters for forward or backward counting. EZ-10-D-IN gives also overfl ow indication for each total counter.

product information
rder code :   EZ-10-D-IN
Description:   10-CH Digital Input module / RS485
Power Supply:   10..40 Vdc; 19..28 Vac (50-60 Hz)
Isolation:   1.500 Vac
Inputs:   10-CH (reed, proximity, pnp, npn, contatto pulito) isolated, common negative, self-powered 24 Vdc, protected from transients up to 600 W/ms
Counters:   8 inputs @ 16 bit, max freq. 100 Hz; 2 @ 32 bit, max freq. 10 KHz
Communication:   RS485 2 wire, ModBUS RTU slave protocol
Dimensions:   17,5 x 100 x 112 [mm]
Mounting:   35 mm symmetrical DIN (46277) rail

 

EZ-10-D-OUT

10-CH digital output module / RS485


The EZ-10-D-OUT is used to drive N.10 MOSFETS from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial interface. The digital output max load is 0,5 A (inductive) and 0,5 A (resistive) with maximum switch-on / switch-off cycle frequency of 2 cycles/second. The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
product information
Order code :   Z-10-D-OUT
Description:   10-CH digital output module / RS485
Power supply:   10..40 Vdc / 19..28 Vac
Outputs:   10-CH optoisolated channels, mosfet semiconductor
Outputs protection:   From short circuit and overvoltage with 6..40 Vdc range
Diagnostic:   Channel status, programmable
Serial communication:   RS485 MosBUS RTU
Dimensions:   17,5 x 112 x 100 mm
Mounting:   35 mm symmetrical 46277 DIN rail

EZ-D-IN

5-CH Digital input module / RS485


The EZ-D-IN is used to interface 5 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocol MODBUS RTU through the RS485 serial interface. A 16 bit counter is available on each input, the maximum frequency input is 100 Hz and it is possible to set one input as a fast counter with a maximum frequency of 10kHz. The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.
 
product information
Order code :   EZ-D-IN
Description:   5-CH Digital input module / RS485
Power supply:   10..40 Vdc; 19..28 Vac (50-60 Hz)
Inputs:   5 CH (reed, proximity, pnp, npn, contact) with common negative, self powered 24 Vdc, isolated, protected from transient up to 600 W/ms
Counters:   4 @ 16 bit, max frequency 100 Hz; 1 @ 32 bit, max frequency 10 KHz
Anti rebounce filter:   Settable from 5 to 250 ms
Communication:   RS485 a 2 fili, ModBUS RTU slave protocol
Dimensions:   17,5 x 100 x 112 [mm]
Mounting:   35 mm guide DIN 46277

EZ-D-IO

8-CH, 6 digital input - 2 digital outputs control module


EZ-D-IO has N.6 digital inputs, N.2 SPST relays, capacity of 2Aac, 250 Vac. It can be used as simple Input/Output module or, through dip-switches, is possible to acticate special functions to drive motors, pneumatic and motorised valves.The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.

product information

Order code :   EZ-D-IO
Description:   8-CH, 6 digital input - 2 digital outputs control module
Power supply:   10..40 Vdc, 19..28 Vac
Isolation:   1,5 kVac (input/other circuits), 3,75 kVac (output/other circuits)
Input:   6-CH reed, proximity, pnp, npn, contact etc.
Output:   2-CH relay 5 A, 250 Vac
Operating mode:   I/O slave, time based control logic
Control logic:   IEC 61131-2 type 1 motor control, valves, limit switch, alarms
Protocol:   ModBUS RTU slave

EZ-D-OUT

5-CH Digital output module / RS485


The EZ-D-OUT is used to drive N.5 SPST relays from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial interface. The instrument has N.5 SPST relays, capacity resistive loading of 5 A 250Vac , inductive loading of 2 A. The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
product information
Order code :   EZ-D-OUT
Description:   5-CH Digital output module / RS485
Power Supply:   10..40 Vdc; 19..28 Vac (50-60 Hz)
Outputs:   5-CH SPST relay, settings NO/NC
Safe state:   Settable at start up or in case of communication fault, programmable delay fron 50 to 250 ms
Communication:   RS485 2 wire, ModBUS RTU slave protocol
Dimensions:   17,5 x 100 x 112 [mm]
Mounting:   35 mm symmetrical DIN (46277) rail

EZC-16DI-8DO

16 CH digital input - 8 CH digital output CANopen / ModBUS


The EZC-16DI-8DO is an 16 CH input / 8 CH output mixed module. The inputs have 32-bit counters / 10 kHz max frequency, mosfet Outputs with shared negative pole. The communication protocols are CANopen or ModBUS RTU (protocol selectable through dip-switch). A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.
product information
Order code :   EZC-16DI-8DO
Description:   16 CH digital input - 8 CH digital output CANopen / ModBUS
Power Supply:   10..40 Vdc, 19..28 Vac
Max power consumption:   2,5 W
Isolation:   1,5 kVac (3 way)
Response time:   1,2..2,5 ms
Operating temperature:   -10..+65°C
Dimension:   35 x 100 x 112 mm
Digital input:   16 channels; IEC EN 61131-2; Nr 8 counters @32 bit (max 10 kHz); TPDO < 1 ms
Digital output:   8 channels, 32 bit (max 10 kHz); mosfet, max 500 mA per channel, Vext 5..30 Vdc; RPDO < 1,25 ms

EZC-24DI

24 CH digital input CANopen / ModBUS


EZC-24DI is used to interface N.24 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocols CANopen or ModBUS RTU (protocol selectable through dip-switch). It disposes of 32 bit counters (N.8), maximum frequency input is 10 KHz. A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.
product information

Order code :   EZC-24DI
Description:   24 CH digital input CANopen / ModBUS
Power Supply:   10..40 Vdc, 19..28 Vac
Max power consumption:   2,5 W
Isolation:   1,5 kVac (3 way)
Response time:   2,5 ms
Operating temperature:   -10..+65°C
Dimension:   35 x 100 x 112 mm
Channels:   24
Polarity:   EN 61131-2 sink (npn)
Counters:   8 @ 32 bit (max 10 kHz)
Pulse width:   Min 250 μs
TPDO:   < 1 ms

EZC-24DO

24 CH digital output CANopen / ModBUS


EZC-24DO is used to drive N.24 MOSFETS from all of the control systems which are able to communicate by the protocols CANopen or ModBUS RTU (protocol selectable through dip-switch). The digital output max load is 0,5 Awith ON/OFF delay of 1ms. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.
product information
Order code :   ZC-24DO
Description:   24 CH digital output CANopen / ModBUS
Power Supply:   10..40 Vdc, 19..28 Vac
Max power consumption:   2,5 W
Isolation:   1,5 kVac (3 way)
Response time:   1,2 ms
Operating temperature:   -10..+65°C
Dimension:   35 x 100 x 112 mm
Channels:   24
Output type:   Mosfet, max 500 mA per channel
RPDO:   < 1,25 ms

ETAP Users - Listed by Industry Electrical Engineering Consulting Firms ETAP

工程咨询

ETAP Users - Listed by Industry Data Centers ETAP

数据中心

ETAP Users - Listed by Industry Oil & Gas ETAP

采油平台

ETAP Users - Listed by Industry Generation Plants ETAP

发电厂

ETAP Users - Listed by Industry Nuclear Generation ETAP

核电厂

ETAP Users - Listed by Industry Transmission & Distribution ETAP

输配电

ETAP Users - Listed by Industry Government & Military Facilities ETAP

政府及军事设施

ETAP Users - Listed by Industry Metals & Mining ETAP

冶金矿业

ETAP Users - Listed by Industry Manufacturing ETAP

制造业

ETAP Users - Listed by Industry Renewable Energy ETAP

可再生能源

ETAP Users - Listed by Industry Transportation ETAP

铁路运输系统

ETAP Users - Listed by Industry Education - Colleges & Universities ETAP

教育系统